A special standard has been created to save drowning people in pools
[ad_1]
They will save with circles, poles and ends of Alexandrov
The Federal Agency for Technical Regulation and Metrology decided to standardize the means of rescuing drowning people in pools. Recently, the department adopted the national standard “Swimming pools. Means of salvation.
As it became known to MK, the standard identifies 4 categories of rescue equipment: a rescue pole, a floating pole, a life buoy, a stretcher raft, and also the end of Aleksandrov. The pole is designed to assist those floating on the edge walkways of the pool tub. The rescue equipment consists of the pole itself and the tip attached to it. The latter can be “C-shaped” (in the form of a hook), “O-shaped” and in the form of a loop. Tips can be interchangeable, but in any case must be firmly attached to the pole. The pole itself should be light, strong, without sharp edges and burrs, with a non-slip handle. The total length of the gesture must be at least 3 m, and by the way, there cannot be a telescopic pole.
There are separate requirements for lifebuoys. Firstly, each of them must be equipped with a floating line (a thin cable for towing) and a handrail (a tape fixed around the perimeter of the circle, which a rescuer could take on). The length of the line is at least 2/3 of the width of the pool, the handrail is 4 external diameters of the circle. The mass of the circle was also determined (up to 2.5 kg for adults and up to 1 kg for children), the diameter of the inner hole, and the diameter of the section of the circle.
The end of Alexandrov is a kind of analogue of a life buoy (in terms of functionality), but more compact and convenient for giving to a drowning person. He also has a line, but instead of a circle – a loop with two floats. The line is also not less than 2/3 of the width of the bath, in addition, at its end there must be a loop for the lifeguard’s hand.
The stretcher raft should be of rigid construction, but still float well. It should have fixation straps, and around the perimeter – from 16 to 21 grips (carrying holes).
All rescue equipment must be made of buoyant and hypoallergenic materials.
[ad_2]
Source link
